INCLUDES THE DRIVE CHAIN SPROCKET SIZE OF YOUR CHOICE! 

This is a HD AXLE 26" WHEEL made for 150mm to 155mm mm rear frame dropout Multi-Speed bikes.   

Made for 2-stroke pedal start engines.   

We include the 6-hole sprocket of choice and will install it with 10.9 grade M6 bolts secured with Blue 242 Permatex.    

NOTE:  We have installed the flanged left hand threaded sprocket hub on permanently with Red 271 Permatex permanent thread lock and locked down the set screws for a permanent hub installation.  As we say> She's on there to stay.

 You must tell us in a message to seller at Check Out which sprocket you want to be included with your wheel.

Choose one of these. 36T, 44T, 48T, 50T or 56T.   If we are out of stock on any given sprocket we will call you for your alternate choice. 

If using a disc brake, your brake rotor must be larger or smaller in diameter then the chain sprocket to gain approx. 21mm caliper clearance.   If you need to know the diameter of the sprocket you want, just send us an inquiry. 

Heads up:  Our HD AXLE 6-hole sprockets are not the same as those sprockets made for disc brake hole patterns. 

WHEELS are shipped via UPS so cannot be delivered to a USPS PO Box #. 

NOTE:  (6) M6 10.9 grade bolts and flanged nuts are included if a sprocket is ordered the same time as the Wheel.

An all-steel HD AXLE solid hub using M6 bolts means it is much stronger versus those made of cast aluminum that use M5 screws in a disc brake pattern.    ( see last Picture )

See 25 attached pictures and read all the descriptions here in to gain full the HD AXLE understanding.    

This 26" #2 HD AXLE wheel is made with 12 ga. spoke alignment for 150mm to 155mm wide frame dropouts.   

This Multi-Speed wheel is Not suitable for a Single Speed bike frame. ( See our single speed wheel add.)

This wheel can be used with all 2 stroke mid-frame bike engines such as our SkyHawk Gt5A-Es as well as with 4 stroke engines as long as the engine's transmission has a freewheel included such as is found in our 4G and 5G T belt drive 4 stroke engine transmissions. 

NOTE:  This wheel is the same as the single-speed wheel except the rim is spaced more inward to be in the center of a 150mm to 155mm drop out.  

HD Axle Wheels can work with Disc Brakes and / or can also be used with a Caliper Vee-Brakes due to having a CNC cut rim flat surface.   2 ways! 

#2 HD Axle wheels come with a permanently installed steel 6 Hole CCW 36-1 screw on chain sprocket flanged hub and 1/4" tk. spacer lock ring.   DO NOT TRY TO REMOVE IT. 

#1 HD axle wheels with a Freewheel Sprocket Flanged Hub are found in the 4 cycle engine section.   DO NOT ORDER A #1 HD AXLE WHEEL FOR A 2 STROKE ENGINE APPLICATION BECAUSE A FREEWHEEL HUB will not allow engine pedal starting. 

Failure to follow good engineering installation procedure can damage the HD Axle if done incorrectly.  

 HEADS UP Guidance: The motorized bike builder is the prime contractor and accepts all liability.  

• NOT ALL BIKE FRAMES HAVE CHAIN STAYS SUITABLE FOR MOTORIZING.

• 2-stroke pedal start engines require a permanent affixed Sprocket Flanged Hub like what this wheel has. 

• The "disc brake hub" must be used in all cases as it serves as a jam nut for the Sprocket Hub.

• The drive sprocket is installed on the outboard side of the sprocket hub flange so it can be removed in the future. 

• Failure to install is not a warrantable situation.

• Good luck in your build and may God speed you safely.